Please EMAIL us and you will usually have a response in minutes, to hours depending on the time of day it was received. Email is the best way to cut out telemarketers all together, we apologize for any inconvenience this may cause. ALL EMAIL submissions go directly to the cell phones of our towing products staff. This is the quickest way to hear back from us, or if you have technical questions feel free to contact the PopUp Towing Factory staff on details of their products.
The SB116XL has an extended coupler for those wanting to pull with a flat bed truck with a recessed ball.
PopUp Extended Coupler gives you an additional sixteen inches clearance between the truck cab and the trailer nose, and between the truck tailgate and the trailer bulkhead. This gives you more trailer swing and more room for hook-up. To make your towing experience better yet, this extended coupler is fitted with a PopUp GN8 self-latching coupler.
This coupler latches when the trailer is lowered onto the ball. It also has a molded hitching guide to make coupling easier. To uncouple, you simply pull a release cable located near the trailer jack handle. The GN8 coupler has a rating of 28,000 pounds.
These units are fabricated using extra heavy wall tubing for maximum strength. They are rated at 24,000 pounds gross trailer weight.
Short Bed Extended Couplers come with all necessary hardware and coupler release cabling.
Installation takes about half an hour.
THE SB116 MUST ONLY BE USED WITH A SAFETY THRU PIN
If your trailer doesn’t have a thru pin, drill a hole and install a 1/2″ or larger bolt.
Verify that the gussets on the trailer will clear the side rails of your truck.